Home » Posts tagged 'backflow testing'
Tag Archives: backflow testing
Drain Repair – How to Get Rid of Clogged Drains
Clogged drains are common and often result in slow drainage or sewage backups. A professional can use a variety of methods to clear blocked drains.
For a sink or tub that is completely clogged, try using a plunger to break up the clog. If that doesn’t work, use a drain auger. Contact Drain Repair Near Me for specialized services.
The plumbing system in your home is a complex network of water and waste lines. These pipes are used for delivering clean, fresh drinking water and taking away waste from your home. They’re essential to your everyday life, but they can also become a problem if they get clogged. If left unchecked, drain clogs can lead to major issues, including water and sewer backups.
You can try to prevent clogs by taking care of the things that go down your drains. This means avoiding putting food scraps down the garbage disposal, taking care not to flush unmentionable items down the toilet and only using your drains for what they are designed for. However, it is impossible to completely avoid a clog. Even if you are careful, your drains may still become blocked over time.
The most common causes of a clogged drain are hair, fat, oil and grease, paper products, mineral buildup and more. When these materials are allowed to build up in your pipes, they will catch everything that goes down the drain and cause a full blockage.
When you notice a clogged drain, don’t panic. You may be able to fix the problem at home by using a plunger or hand-cranked drain snake. You can also purchase a chemical-based drain cleaner, but these are not recommended as they can damage your pipes.
A more rudimentary, but effective solution, is to use a bent wire hanger as a DIY snake. Untwist the hanger and stick the hook part down the drain, then jiggle it around to entangle its head with the clog and pull it out. You can also combine baking soda and salt to form a clog-clearing fizz that will break down any gunk that has collected in your pipes.
If these methods don’t work, it may be time to call a professional. Clogged drains that are deeper in the plumbing system can be more difficult to clear and will require more extensive work to resolve. An experienced plumber can determine the source of the clog and use tools to dislodge it.
Cracked Pipes
Pipes break because of age and wear, excessive pressure from a nearby obstruction or even freezing temperatures. These factors can cause hairline cracks to develop, which worsen over time and can lead to a complete pipe break. If left untreated, cracked pipes can result in water damage to walls and floors, mold growth in insulation and wood rot around door trim, window frames and more. They can also contribute to a weakened foundation or sinkholes under the house.
There are some obvious warning signs of a cracked pipe, such as wastewater pooling where it shouldn’t be or damp areas around the affected pipes. However, some signs may be less clear. For example, a cracked pipe that’s behind a wall or other finished surface will require CCTV inspection to determine the exact location and extent of the break. It’s not uncommon for pests such as rodents to be drawn to cracked or broken pipes, as they provide an easy route into a home.
Once a professional has identified the source of a crack, they can apply a variety of repair products to the damaged area. It’s important that the plumber chooses a product suitable for the type of pipe, its condition and the amount of pressure it handles. For example, pipes that supply drinking water need to be repaired with a product designed for that purpose.
Some products, such as epoxy putty, can be applied directly to a cracked pipe and allow it to cure in place. This is a quick and cost-effective way to fix a cracked pipe, though it’s only a temporary solution. Other repair methods such as drain lining or pipe replacement are more permanent solutions.
It’s important to turn off the water supply at the nearest shut-off valve before starting any work. If there isn’t a valve near the cracked pipe, you’ll need to shut off the entire water supply for your home. Once the leak has been repaired, it’s important to turn the water back on slowly. Otherwise, the sudden increase in water pressure can cause further damage to the newly repaired area.
Leaking Pipes
Leaking pipes can cause water damage in your home, as well as creating a potential health hazard. They also allow sewage and harmful gases to enter your home, which is why it’s so important to have these issues repaired as quickly as possible.
Fortunately, there are a few things you can do in the meantime to prevent further damage and minimize the impact of leaky pipes. Start by shutting off the water supply to the area where you suspect a leak. This will help to prevent flooding and other complications while you’re attempting to make repairs.
Next, contain the leak by placing a bucket or other container under it to catch any leaking water. It’s also a good idea to clean the surrounding area to remove any dirt or grease that could interfere with your repair. You can also use a noncontact electrical tester to ensure there are no live wires in the area before you begin working. Finally, be sure to wear gloves and a face mask when working with potentially dangerous chemicals.
A pipe leak usually occurs when a section of pipe becomes damaged, worn out or ruptured. This can be caused by a variety of factors, including general wear and tear, age, the environment and even tree roots. Regardless of the cause, it’s important to address the issue as quickly as possible to prevent further damage and avoid costly repairs.
One of the most common ways to fix a leaking pipe is by using a rubber patch with a clamp. These items can be purchased at most hardware stores, and they’re designed to quickly seal a leaky portion of pipe. Just be sure to choose a clamp that’s the same diameter as your pipe, and tighten it evenly for a secure fit.
Another way to temporarily fix a leaky pipe is to use plumber’s tape and a re-patch kit. This type of solution can be effective for most situations, but it’s a good idea to call a professional to assess the damage and perform a permanent repair. They’ll have the right tools and equipment to locate all leak sources and ensure a lasting solution.
Sewage Backups
Your home’s sewer, or wastewater, lines transport the waste produced by your toilets, tubs and sinks away from the house. When a problem occurs with these lines, sewage can back up into your home and cause contamination and water damage. While you can’t prevent all issues with your sewer line, you can take a few steps to catch problems before they turn into full-on sewage backups.
If you see wastewater backing up into your bathtub, toilet or sink, you should immediately shut off the water and call a plumber to assess the situation. The sewage could contain harmful bacteria and viruses that can make people sick. It’s also a major health hazard for pets and children who may come into direct contact with it.
Sewage backups are usually caused by a blockage in the sewer line or too much wastewater for the system to handle. These problems can happen in homes connected to public or private sewer systems, including septic tanks. Many homeowners are able to prevent sewage backups by having their sewer line inspected regularly and having clogs cleaned.
Signs that your sewer line is having trouble include slow draining, gurgling sounds and a smelly odor. It’s important to get these issues fixed before they turn into a sewage backup that can flood your home and cause severe damage.
If the sewage isn’t flowing into your home, you might be able to clear the issue yourself with a drain snake. However, if it is leaking into your home, you’ll need to shut off the water and electricity, and contact emergency plumbers.
Sewage backups are not only a health hazard, they’re also an expensive and stressful mess that can damage your home. To prevent this from happening, be sure to check your drains frequently and avoid putting anything down the drains that isn’t meant for it. It’s also a good idea to have your sewer line professionally inspected every few years to identify any early problems and keep them from becoming full-blown emergencies. The investment is well worth it to protect your home from costly sewage damage.